Extron electronics VNM EC 200, User Manual, Page: 133 / 242

Player Presets
Player presets are created similar to switching presets. A player channel is placed into
the
Preset
panel first, followed by a decoder or decoders. The player channel attributes
include the playback directory, the playback file, set the start and end offset time and
synchronization, and select the playback channels.
To Play a Channel
1. Create a preset with a player channel and a decoder (see Creating Presets on
page 116).
1 1
4 4
5 5
6 6
3 3
2 2
Figure 111. Preset for Playing a Channel
2. In the Preset panel, select the player (see figure 111,
1
).
The Device Attributes panel populates with the configuration options appropriate
for the player (
2
).
3. Select an existing directory (
3
) (see Selecting a File for Playback on page 127).
4.
Select a filename (
4
) for playback (see
Selecting a File for Playback
on page 127).
5. Set the launch status (
5
) as desired (see Launch Behavior on page 124).
6. Select playback options (Time Sync, Start Offset, Stop Offset, and File Length) from the
remainder of the list (
6
).
7. In the Preset panel, click Save , then name the preset (see Saving Presets on
page 119).
The play preset is now ready.
8. Click Launch in the Preset List panel to start playback of the file.
VNM EC 200 • Preset Manager 123