Extron electronics VNM EC 200 User Manual Download Page 22

Page: 22 / 242

Click

Login

or press <Enter>. The

Devices

page opens (see figure 10). The

VNM EC 200 is now ready for configuration and operation.

NOTE:

The

Devices

page displays only devices properly configured to operate

with the VNM EC 200 (see the user guides for individual devices for more
information). The VNM EC 200 must also be configured properly.

192.168.254.253

192.168.254.254

192.168.0.48

192.168.0.50

192.168.0.54

192.168.0.56

192.168.0.34

192.168.0.42

192.168.0.43

192.168.254.253

192.168.0.30

192.168.0.33

192.168.0.32

192.168.0.45

192.168.0.35

192.168.0.38

192.168.0.31

192.168.0.51

192.168.0.39

192.168.0.49

192.168.0.47

192.168.254.254

Actions:

Upgrade

Compression

Peripherals

License

Info

Connections

Configure

Format

Mode

Misc

Group

Figure 10.

Devices Page

The

Alarms

Configuration

, and

System

Info

pages, are used to configure and

operate the EC 200. The remaining tabs for the

Devices

Preset

Manager

, and

Format

Editor

pages can configure and operate connected devices.

Power Down Procedure

To safely power down the VNM EC 200, press the recessed power button on the rear of the
controller (see

Rear Panel Features

on page 8). The power LED turns off.

NOTE:

Turning off the controller using the power button removes the main power, but

standby power is still supplied to the system.

VNM EC 200 • Controller Configuration and Operation

Summary of Contents for VNM EC 200



















































































































































































































































Search results

Summary of Contents for VNM EC 200

Reviews:

Extron electronics VNM EC 200, User Manual, Page: 22 / 242

Search results

Summary of Contents for VNM EC 200

Reviews: