manualshive.com logo in svg

EFI E-36A, Installation And Service Manual, Page: 87 / 129

Share
Download
EFI E-36A Installation And Service Manual Download Page 87

87 

Installation and Service Guide: Color Controller E-36A

Performing Backup and Restore

Backup recommendations

Even though the server maintains a backup, you can use the factory default image for recovery of the factory 

installation. Creating a separate backup provides the ability to retrieve customized settings and job information if a 

recent backup is needed. You can create a backup by using Fiery System Restore (from Command WorkStation, 

WebTools, or Fiery QuickTouch).

•

To create a backup of the system configuration settings using Command WorkStation, or from a remote location 

using WebTools, see 

“Backing up the system configuration”

 on page

 88.

•

To create a backup of the Fiery server using Fiery System Restore, see 

“Using Fiery System Restore”

 on page

 90.

3

Fiery System Restore 
in WebTools or Fiery 
QuickTouch: 

Fiery 

System Restore

 > 

Backup Now

> 

USB 

> 

New image

Customized image, 
manually backed up. 
Includes same content as 
automatically backed up 
customized image 
(described in previous 
row).

Bootable 
option 
supported.

Can also 
create a non-
bootable 
image.

USB device.

•

If bootable, can restore 
directly from image (see 

“To 

restore the system from 
bootable USB storage device”

 

on page

 93)

•

Fiery System Restore (see 

“Using Fiery System Restore”

 

on page

 90)

4

Fiery System Restore 
in WebTools or Fiery 
QuickTouch: 

Fiery 

System Restore

 > 

Backup Now

> 

USB

 > 

Fiery factory image

Factory default image, 
manually backed up. 
Includes factory default 
version of software and 
configuration settings.

Does not include print job 
information (print jobs, 
job logs, and job settings 
such as paper size).

Bootable 
image only.

USB device.

•

Can restore directly from 
image (see 

“To restore the 

system from bootable USB 
storage device”

 on page

 93)

•

Fiery System Restore (see 

“Using Fiery System Restore”

 

on page

 90)

5

Preinstalled recovery 
backup image

Factory default image, 
factory preinstalled 
recovery backup. Includes 
factory default version of 
software and 
configuration settings.

Does not include print job 
information (print jobs, 
job logs, and job settings 
such as paper size).

Non-bootable 
image.

Preinstalled at 
factory on 
internal HDD.

Fiery System Restore (see 

“Using 

Fiery System Restore”

 on 

page

 90)

Backup method

Description of backup 
image

Bootable 
option

Possible 
destination

Restore method

Summary of Contents for E-36A


































































































































Reviews:

No comments