44
Installation and Service Guide: Color Controller E-36A
Using the E-36A
Figure 24:
E-36A power button
4
Check the Fiery QuickTouch display panel.
Allow startup to proceed without interruption. Do not press any buttons while the system is starting.
5
To shut down the E-36A, do one of the following:
Note:
Make sure that the E-36A is not receiving, processing, or printing any files. If the system just finished
processing, wait at least five seconds after the system reaches Idle state before you power off the printer.
•
From the Fiery NX One Station monitor (Optional) or Windows client computer using Remote Desktop
Connection, click the Windows
Start
button, and select
Power > Shut Down
.
•
From the Fiery QuickTouch Home screen, press the
Quick Options
menu button and select
Shutdown system.
•
From
the printer operation panel, do the following:
•
Press the
Home
button and select the
Fiery
icon.
•
Press the
Fiery
tab, select
Restart Fiery
and then press
Shut Down.
6
If you shut down the E-36A, move the E-36A power switch to the off (O) position for maximum energy savings or
service (wait 10 seconds before you proceed).
To restart or reboot the E-36A from Fiery NX One Station (Optional) or Remote Desktop Connection
1
Make sure that the E-36A is not receiving, processing, or printing any files.
If the system just finished processing, wait at least five seconds after the system reaches Idle before you proceed.
2
Do one of the following:
•
To reboot the entire system including the operating system, click the
Windows Start
button and select
Power >
Restart
.
Restarts both E-36A and Windows operating system.
•
To restart only the E-36A system software, Click “>>” icon on the Fiery Ticker and select
Server Actions
>
Restart
Fiery
and then click
OK
.
Restarts only the E-36A system software without rebooting the Windows operating system.