125
Installation and Service Guide: Color Controller E-36A
Servicing the System with Furniture
Servicing the System with Furniture
This chapter describes how to remove the E-36A from the Fiery NX One Station to access internal components for
service.
For the assembly instruction on the Fiery NX Station, see the documentation provided with Fiery NX Station kit.
Procedures
If the E-36A is installed in the optional furniture, you need to remove it from the furniture before performing most
service procedures.
Figure 1:
E-36A installed on the furniture
To remove the E-36A from the furniture
1
Make sure the E-36A is powered off and all the cables are removed from the back of the E-36A.
DANGER
To avoid injury, do not lift the E-36A without assistance.