104
Installation and Service Guide: Color Controller E-36A
Installing System Software
After installing or updating the system software
1
Restore the dongles and devices that you removed before installing the system software.
2
If the power synchronization is disabled, enable the power synchronization (see
3
4
Install any required software patches (see
5
(Optional) Set up the proxy configuration if you have a proxy server.
In Configure, click
Fiery Server
>
System Updates
>
HTTP Proxy Settings
, and enter the proxy server information.
Save your changes and reboot the E-36A.
You can also enter the proxy server information in System Updates application if a monitor, mouse, and keyboard
are attached to the E-36A.
For more information on setting up proxy configuration, see
Configuration and Setup
, which is part of the user
documentation.
Verify the E-36A operation
1
Print the Test Page and the Server Configuration page (see
If the Test Page does not print, verify that the printer interface cables are securely connected and on the correct
ports, and verify that the printer interface board is securely connected to the motherboard.
If image quality is poor, test the printer (see the service documentation that accompanies the printer).
2
Verify that the E-36A is connected to the network (see
3
Ask the site administrator to download a test job over the network.
If the job does not print or has poor image quality, see the Troubleshooting topics in
Configuration and Setup
,
which is part of the user documentation.
Before you leave the customer site
1
Remind the site administrator to do the following:
•
Import archived jobs.
Please note that some archived jobs may not print if you have upgraded the E-36A to the newer version.
•
Restore the system configuration settings.
•
(Optional) Register Adobe Acrobat the first time you use it.
2
Reinstall the following:
•
Fonts
•
Custom simulations
Note:
This upgrade may not be compatible with old user software.