manualshive.com logo in svg

EFI E-36A, Installation And Service Manual, Page: 90 / 129

Share
Download
EFI E-36A Installation And Service Manual Download Page 90

90 

Installation and Service Guide: Color Controller E-36A

Performing Backup and Restore

3

In the 

Backup & Restore

 dialog box, select 

Restore 

> 

Next, select the reference (.fbf ) file or the recent backup you 

want restore and then click Next

.

You can select the backup file using the 

Browse

 button, or you can select a recent backup.

4

Select the items you want to restore, and then click 

Next

. 

5

Click 

Finish

. 

To restore the system configuration from WebTools

1

Access Configure (see 

page

 32

).

2

On the left side, choose 

Fiery Server

 > 

Restore

.

3

Select the reference (.fbf ) file and data (.DAT) file, and then click 

Next

. 

4

Select the items you want to restore and then click 

Next

.

5

Click 

Reboot

. 

Using Fiery System Restore

Fiery System Restore allows you to create a backup of the E-36A for quick recovery later when any problem happens. 

You can restore the E-36A either from images stored on the local HDD, USB HDD, network location, or from a 

bootable USB drive. Fiery System Restore also provides the feature of creating the scheduled backups. You can access 

the Fiery System Restore from WebTools, Fiery QuickTouch or Command WorkStation.

You must login to the system as a system administrator to use the Fiery System Restore features. 

To access the Fiery System Restore on Fiery QuickTouch

1

On Fiery QuickTouch, press the 

Quick launch

 icon on the bottom-left corner of the screen.

2

Press the 

Fiery System Restore 

icon and log is as a system administrator.

3

Follow the on-screen menus to schedule automatic backups, manually back up the E-36A, or restore the E-36A.

To access the Fiery System Restore from Command WorkStation

1

Launch Command WorkStation and login to the E-36A with Administrator privileges.

Note:

 

The default password (Fiery.1) will be set after any of the following:

•

You re-install the system software

•

You restore the recovery partition (from Fiery System Restore)

2

From the 

Server

 menu, select 

Device

 

Center

.

3

In 

Device

 

Center

, click 

Tools

 on the left side, and then click 

Fiery System Restore.

The 

Fiery System Restore

 will be displayed on the default web browser window.

Summary of Contents for E-36A


































































































































Reviews:

No comments