Danfoss VLT Automation VT Drive FC 322 Programming Manual Download Page 186

Page: 186 / 304

2.15 Main Menu - Data Readouts 2 - Group 18

2.16.1 18-0* Maintenance LogLG-0# Maintenance Log

This group contains the last 10 Preventive Maintenance logs. Maintenance Log 0 is the latest log and Maintenance Log 9 the oldest.

By selecting one of the logs and pressing OK, the Maintenance Item, Action and time of the occurrence can be found in par. 18-00

Maintenance Log: Item

–

par. 18-03

Maintenance Log: Date and Time

The Alarm log button on the LCP allows access to both Alarm log and Maintenance log.

18-00 Maintenance Log: Item

Array [10]

Range:

Function:

[0 - 255 ]

Locate the meaning of the Maintenance Item in the description of par. 23-10

Maintenance Item

18-01 Maintenance Log: Action

Array [10]

Range:

Function:

[0 - 255 ]

Locate the meaning of the Maintenance Item in the description of par. 23-11

Maintenance Action

18-02 Maintenance Log: Time

Array [10]

Range:

Function:

0 s*

[0 - 2147483647 s]

Shows when the logged event occurred. Time is measured in seconds since last power-up.

18-03 Maintenance Log: Date and Time

Array [10]

Range:

Function:

Application

dependent*

[Application dependant]

NB!

When mounting an Analog I/O MCB 109 option card, a battery back-up of date and time is included.

18-30 Analog Input X42/1

Range:

Function:

0.000*

[-20.000 - 20.000 ]

Read out of the value of the signal applied to terminal X42/1 on the Analog I/O Card.

The units of the value shown in the LCP will correspond to the mode selected in par. 26-00

Terminal

X42/1 Mode

18-31 Analog Input X42/3

Range:

Function:

0.000*

[-20.000 - 20.000 ]

Read out of the value of the signal applied to terminal X42/3 on the Analog I/O Card.

The units of the value shown in the LCP will correspond to the mode selected in par. 26-01

Terminal

X42/3 Mode

2 Parameter Description

VLT

Automation VT Drive FC322

Programming Guide

184

MG.20.W1.22 - VLT

is a registered Danfoss trademark

Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com

http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx

Summary of Contents for VLT Automation VT Drive FC 322

















































































































































































































































































































Search results

Summary of Contents for VLT Automation VT Drive FC 322

Reviews:

Related manuals for VLT Automation VT Drive FC 322

Brands by name

Popular brands

Danfoss VLT Automation VT Drive FC 322, Programming Manual

Search results

Summary of Contents for VLT Automation VT Drive FC 322

Reviews:

Related manuals for VLT Automation VT Drive FC 322

Brands by name

Popular brands