Danfoss VLT Automation VT Drive FC 322 Programming Manual Download Page 179

Page: 179 / 304

16-39 Control Card Temp.

Range:

Function:

0 C*

[0 - 100 C]

View the temperature on the control card, stated in

16-40 Logging Buffer Full

Option:

Function:

View whether the logging buffer is full (see par. 15-1*). The logging buffer will never be full when

par. 15-13

Logging Mode

is set to

Log always

[0].

[0] *

[1]

Yes

2.15.5 16-5* Ref. & Feedb.

Parameters for reporting the reference and feedback input.

16-50 External Reference

Range:

Function:

0.0*

[-200.0 - 200.0 ]

View the total reference, the sum of digital, analog, preset, bus and freeze references, plus catch-

up and slow-down.

16-52 Feedback [Unit]

Range:

Function:

0.000 Proc-

essCtrlU-

nit*

[-999999.999 - 999999.999 Proc-

essCtrlUnit]

View value of resulting feedback value after processing of Feedback 1-3 (see par. 16-54

Feedback

1 [Unit]

, par. 16-55

Feedback 2 [Unit]

and par. 16-56) in the feedback manager.

See par. 20-0*

Feedback

The value is limited by settings in par. 20-13 and par. 20-14. Units as set in par. 20-12

Reference/

Feedback Unit

16-53 Digi Pot Reference

Range:

Function:

0.00*

[-200.00 - 200.00 ]

View the contribution of the Digital Potentiometer to the actual reference.

16-54 Feedback 1 [Unit]

Range:

Function:

0.000 Proc-

essCtrlU-

nit*

[-999999.999 - 999999.999 Proc-

essCtrlUnit]

View value of Feedback 1, see par. 20-0*

Feedback

The value is limited by settings in par. 20-13

Minimum Reference/Feedb.

and par. 20-14

Maximum

Reference/Feedb.

. Units as set in par. 20-12

Reference/Feedback Unit

16-55 Feedback 2 [Unit]

Range:

Function:

0.000 Proc-

essCtrlU-

nit*

[-999999.999 - 999999.999 Proc-

essCtrlUnit]

View value of Feedback 2, see par. 20-0*

Feedback

The value is limited by settings in par. 20-13 and par. 20-14. Units as set in par. 20-12

Reference/

Feedback Unit

VLT

Automation VT Drive FC322

Programming Guide

2 Parameter Description

MG.20.W1.22 - VLT

is a registered Danfoss trademark

177

Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com

http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx

Summary of Contents for VLT Automation VT Drive FC 322

















































































































































































































































































































Search results

Summary of Contents for VLT Automation VT Drive FC 322

Reviews:

Related manuals for VLT Automation VT Drive FC 322

Brands by name

Popular brands

Danfoss VLT Automation VT Drive FC 322, Programming Manual

Search results

Summary of Contents for VLT Automation VT Drive FC 322

Reviews:

Related manuals for VLT Automation VT Drive FC 322

Brands by name

Popular brands