Danfoss VLT Automation VT Drive FC 322 Programming Manual Download Page 43

Page: 43 / 304

Automatic Motor Adaptation (AMA). It is very rarely necessary to adjust the motor power factor

parameter manually.

[3] *

Auto energy optim. VT

For optimum energy efficient speed control of centrifugal pumps and fans. Provides a voltage which

is optimized for a squared torque load characteristic of the motor but in addition the AEO feature

will adapt the voltage exactly to the current load situation, thereby reducing energy consumption

and audible noise from the motor. To obtain optimal performance, the motor power factor cos phi

must be set correctly. This value is set in par. 14-43, Motor cos phi. The parameter has a default

value and is automatically adjusted when the motor data is programmed. These settings will typically

ensure optimum motor voltage but if the motor power factor cos phi requires tuning, an AMA func-

tion can be carried out using par. 1-29, Automatic Motor Adaptation (AMA). It is very rarely neces-

sary to adjust the motor power factor parameter manually.

2.3.2 1-2* Motor Data

Parameter group 1-2* comprises input data from the nameplate on the connected motor.

Parameters in parameter group 1-2* cannot be adjusted while the motor is running.

NB!

Changing the value of these parameters affects the setting of other parameters.

1-20 Motor Power [kW]

Range:

Function:

Application

dependent*

[Application dependant]

1-21 Motor Power [HP]

Range:

Function:

Application

dependent*

[Application dependant]

1-22 Motor Voltage

Range:

Function:

Size rela-

ted*

[200 - 1000 V]

Enter the nominal motor voltage according to the motor nameplate data. The default value corre-

sponds to the nominal rated output of the unit.

This parameter cannot be adjusted while the motor is running.

1-23 Motor Frequency

Range:

Function:

Application

dependent*

[20 - 1000 Hz]

Select the motor frequency value from the motor nameplate data.For 87 Hz operation with 230/400

V motors, set the nameplate data for 230 V/50 Hz. Adapt par. 4-13

Motor Speed High Limit

[RPM]

and par. 3-03

Maximum Reference

to the 87 Hz application.

NB!

This parameter cannot be adjusted while the motor is running.

VLT

Automation VT Drive FC322

Programming Guide

2 Parameter Description

MG.20.W1.22 - VLT

is a registered Danfoss trademark

Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com

http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx

Summary of Contents for VLT Automation VT Drive FC 322

















































































































































































































































































































Search results

Summary of Contents for VLT Automation VT Drive FC 322

Reviews:

Related manuals for VLT Automation VT Drive FC 322

Brands by name

Popular brands

Danfoss VLT Automation VT Drive FC 322, Programming Manual

Search results

Summary of Contents for VLT Automation VT Drive FC 322

Reviews:

Related manuals for VLT Automation VT Drive FC 322

Brands by name

Popular brands