Cisco D9854, Installation And Configuration Manual, Page: 89 / 440

Status Menu
65
Redundancy Status
Note: This feature is for D9854-I only.
Menu Item Description Parameters
Ports in Use The current output port in use. None, Data1, Data2, or
Both
Change Reasons Description of the reason for the last redundancy
status change. Link, Setup, or
Setup+Link
Change Date &
Time Displays the last date and time the redundancy
status changed. YYYY/MM/DD
HH:MM:SS
MOIP Out Global Status
Menu Item Description Parameters
Engine Error Indicates a critical hardware error that may require
a unit reboot. Yes or No
Stream Overflow Indicates the MPEG over IP transport stream(s)
overflow status. Yes or No
Combined User
Rate Displays the combined output bit rate for all the
configured streams (including FEC).
Actual Rate Port
1/2 Displays the current output bit rates for Data1 and
Data2 ports (including FEC). 0 to 206 Mbps
MOIP Out Stream Status
Menu Item Description Parameters
PE ID Displays the program entry channel. 1 to 16
Stream Port1/Port2 Indicates the stream status of the Management and
Data ports (D9854), or Data1 and Data2 ports
(D9854-I).
Stopped, Suspended,
Active, or Muted
Content Overflow Indicates if the rate of the transport stream(s) to be
encapsulated (including FEC) is higher than the
configured output bit rate.
Yes or No
Link Overflow Indicates if the configured output bit rate
(including FEC) is close or higher than the current
Ethernet link speed for the Ethernet port used for
MPEGoIP output.
Yes or No