Cisco D9854 Installation And Configuration Manual Download Page 232

Page: 232 / 440

Chapter 5 Web GUI Setup and Monitoring

208

Setting up Captions

From the user interface of the D9854/D9854-I, choose

Audio & Video

Captions

. The Captions page is displayed.

In the

Preferred Closed Caption Mode

drop-down list, choose the type of closed

captioning to use if there are multiple available in the stream. The default is
Auto.

Note:

SA Custom is not supported when telecine video coding is enabled.

Click

Apply

The

Closed Caption Mode

field displays the actual closed caption mode in the

output. This is read-only.

Summary of Contents for D9854

























































































































































































































































































































































































































































Search results

Summary of Contents for D9854

Reviews:

Cisco D9854, Installation And Configuration Manual, Page: 232 / 440

Search results

Summary of Contents for D9854

Reviews: