Cisco D9854 Installation And Configuration Manual Download Page 211

Page: 211 / 440

Setting up Input Information

187

Viewing the Disaster Recovery Status

From the user interface of the D9854/D9854-I, choose

Input

Disaster Recovery

Status

. The Disaster Recovery Status page is displayed.

The

State

field displays the current disaster recovery status. The table below lists the

statuses.

State

Description

No Disaster - D/R Ready

The unit is in a normal state and no disaster recovery is

in progress. It is set to use the local or uplink disaster

recovery settings (depending on the

Configured By

field).

Summary of Contents for D9854

























































































































































































































































































































































































































































Search results

Summary of Contents for D9854

Reviews:

Cisco D9854, Installation And Configuration Manual, Page: 211 / 440

Search results

Summary of Contents for D9854

Reviews: