Cisco D9854, Installation And Configuration Manual, Page: 101 / 440

Setup Menu
77
Menu Item Description Parameters
Tune Mode Select the tables required for the service
list creation and signal acquisition. Basic - Requires NIT to be present.
Auto - Uses all the available
service list tables and it will
acquire if any table is present.
Custom - Uses the Custom Tuning
parameters, specified by the user.
The default is Basic.
CA Ctl Sets how the conditional access will
attempt to descramble the scrambled
programs. The behavior of this setting
is different between PowerVu streams
and those that require a CAM.
For PowerVu streams:
Std - In standard mode, if a
program is not authorized, even if
some services are not scrambled,
the whole program will not be
authorized.
Open - In open mode, if a program
is not authorized, any services in
the program that are not
scrambled will still be available.
For Non-PowerVu (CAM) streams:
Std - In standard mode, if a
program’s CA system is not
supported by the CAM, the
channel is not authorized.
Open - In open mode, all the
program’s CA systems are
validated by the CAM. The
channel is always authorized.
RF1, RF2, RF3, RF4 (RFx) Input
Menu Item Description Parameters
RFx Active (RF1,
RF2, RF3, RF4) Select the input to be active.
Note: Setting a new input to be active will
deactivate the currently active input.
Act or No