Cisco D9854, Installation And Configuration Manual, Page: 429 / 440

DPM Default Settings for Different Output Modes
405
Output Mode No Output Passthrough Service
Chans Only MAP
Passthrough MAP Svc
Chans Only Full DPM
Control
TDT Not
Displayed Pass Pass Pass Pass Actual
Value
RST Not
Displayed Pass Pass Pass Pass Actual
Value
TOT Not
Displayed Pass Pass Pass Pass Actual
Value
DIT Not
Displayed Pass Pass Pass Pass Actual
Value
SIT Not
Displayed Pass Pass Pass Pass Actual
Value
ECM Not
Displayed Pass Pass Pass Pass Actual
Value
EMM Not
Displayed Pass Pass Pass Pass Actual
Value
DRT Not
Displayed Pass Pass Pass Pass Actual
Value
CDT Not
Displayed Pass Pass Pass Pass Actual
Value
PE Action (all
PEs) Drop Pass Pass Map Map Actual
Value
The following table contains values passed to the DPM for the D9854 with MOIP and D9854-I
only:
Output Mode SPTS Service Chans
Only SPTS MAP Svc
Chans Only SPTS Full DPM
Control
Map Mode Svc ID & PID Svc ID & PID Actual Value
Duplic Mode Pkt Copy Pkt Copy Pkt Copy
Unref Drop Drop Drop
PSI Options Ctl By Table Ctl By Table Actual Value
PSI Rate SA Std SA Std Actual Value
Svc ID Valid Ch Valid Ch Actual Value
PAT Regen Regen Actual Value
CAT Regen
Regen
Actual Value
PMT Regen Regen Actual Value
TSDT Drop Drop Actual Value