Cisco D9854 Installation And Configuration Manual Download Page 322

Page: 322 / 440

Chapter 5 Web GUI Setup and Monitoring

298

Viewing Diagnostic Logs

From the user interface of the D9854/D9854-I, choose

Support

Diagnostic Logs

The Diagnostic Logs page is displayed.

The Diagnostic Logs page displays all the system log messages with their dates and
times.

Click the arrow next to

Set Date and Time

column to sort by date and time.

Click

Export

to export the log history to a .csv file. The File Download dialog is

displayed. Click

Save

to save the file to your local drive.

Click

Clear

to clear the log history.

Summary of Contents for D9854

























































































































































































































































































































































































































































Search results

Summary of Contents for D9854

Reviews:

Cisco D9854, Installation And Configuration Manual, Page: 322 / 440

Search results

Summary of Contents for D9854

Reviews: