Cisco D9854, Installation And Configuration Manual, Page: 227 / 440

Setting up Input Information
203
Viewing PSI Frequency Table Information
From the user interface of the D9854/D9854-I, choose Input > PSI Frequency . The
PSI Frequency page is displayed.
You cannot make any changes in the PSI Frequency table and can only view the
available frequency plans stored in the receiver. The following is a list of the various
columns:
Abbreviation Description
Transport Stream ID Displays the transport ID.
Frequency (GHz) Displays the downlink frequency, in GHz (0.0 to 15.0 GHz).
Symbol Rate (MSym) Displays the symbol rate, in Mbps.
Orbital Position Displays the orbital position of the satellite, in degrees
(East or West).
Polarization Displays the polarity of the received signal (H,V, or Off).
Flag Displays the satellite position (in degrees), in combination
with the direction (East or West).
FEC Indicates the Forward Error Correction inner code rate
(1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 7/8, 8/9, or 9/10).
RF Modulation Indicates the modulation of the signal (QPSK DVB-S, QPSK
DVB-S2, 8PSK DVB-S2 or 16QAM DVB-S2).
Network ID Displays the original network ID.