Cisco D9854, Installation And Configuration Manual, Page: 410 / 440

Appendix A
Technical Specifications
386
Power and General Specifications
General
Item Specification
LCD 2 lines of 40 characters, backlit LCD.
Keypad Arrow keys, 0 to 9, SELECT, MENU, INFO,
ADV, MAP, APPLY and NAV keys.
LEDs Green LED for Signal status. Red LED for Alarm
indication.
Power
AC Power Connector
Item Specification
Type of connector IEC 320 style C14 appliance receptacle
AC input 100 to 240 VAC, 50/60 Hz
Power (without LNB) 50W typ
Current (without LNB) 0.45A @ 240 VAC typical, 0.7A @ 120 VAC
typical
Power Quality ANSI/IEEE Std C62.41.1-2002
Power
To operate the receiver, you must connect it to an AC power source.
WARNING:
Make sure that at least one end of the power cable(s) remains easily accessible for
unplugging, if you need to switch off the unit. For example: Ensure that the socket
outlet is installed near the product.
WARNING:
To avoid electrical shock, connect the three-prong plug on this product to an earth-
grounded three-pin socket outlet only.