Cisco D9854, Installation And Configuration Manual, Page: 79 / 440

Status Menu
55
Status Menu: General
Menu Item Description Parameters
Input Indicates the currently selected input
source. RF1 to RF4, ASI, or IP.
Status Indicates whether the input signal is
locked. Locked - Indicates the receiver is
locked to a carrier with no valid
content.
Lock+Sig - Indicates the receiver
is locked to a carrier with valid
content.
No Lock - Indicates the receiver
is not locked to a carrier.
Rate (Mbps) Indicates the bit rate of the input transport
stream, in Mbps. –
Level (dBm) Indicates the strength of the received
signal level, in dBm. –
PE Select the Program Entry to view. PE1 to PE16.
Mode Indicates how the program is scrambled. Unkn, DES, DVB, BISS1, BISS2,
or BISS3.
Auth Indicates whether the receiver is
authorized to receive the program. Yes or No.
Enc Indicates whether the received program is
encrypted. Yes or No.
Scr Indicates whether the received program is
scrambled. Yes or No.
CA System Indicates the type of Conditional Access
(CA) system used by the program. SA, BISS, or FTA (Free To Air).
Video Indicates the video encoding, format, and
resolution of the received program. MPEG1, MPEG2, or H264 format
with a resolution of:
SD480i/2997, SD480i/3000,
SD576i/2500, HD720p/5000,
HD720p/5994, HD720p/6000,
HD1080i/2500, HD1080i/2997,
or HD1080i/3000
Unknown or Unsupported.
Rate (Mbps) Indicates the bit rate of the received video
stream, in Mbps. –
Alarms Displays the number of active alarms. –
Warnings Indicates the number of active warnings. –