Cisco D9854, Installation And Configuration Manual, Page: 387 / 440

363
Warning Message
Type Message Cause/Remedy Description ID
MPoIPI: DJ HW
failure (D9854-I
only)
Set De-jittering
Engine failure
(overflow,
underflow or
HW error)
Cause: De-jittering
hardware failure.
Remedy: Software-
controlled reset of de-
jittering block may help.
But in most cases, the
problem is triggered by
the stream originator or
the network conditions
and cannot be fixed in
the decoder.
The de-jittering block
has an overflow,
underflow, or other
hardware problems.
93104
MPoIPI: DJ HW
failure (D9854-I
only)
Clear Need two active
TS streams for
proper error
detection
– – 93104
MPoIPI: DJ HW
failure (D9854-I
only)
Clear Fault Cleared: No
errors – – 93104
Hardware
Platform Set Non-matching
HW Platform.
APP: <D9859 |
D9854/58/24>,
HW: <TMB2 |
HDR/TMB/HDR
2>
Cause: A non-matching
application is loaded
through CDT download
or FLASH
programming.
Remedy: Replace the
non-matching
application and then
reboot the IRD.
The D9859 application
is running on the
D9854/D9858/D9824
platform or the
D9854/D9858/D9824
application is running
on the D9859
application.
94000
Hardware
Platform Clear Matching
Hardware
Platform
detected.
– – 94000
Network ID
Mismatch TS1 Set Original Network
ID in NIT and
SDT mismatched
Cause: The NIT and SDT
have different original
network IDs.
Remedy: Additional
error details are
displayed in the log file.
Ensure that the uplink is
sending the same
original network ID in
SDT and in NIT.
The original network
ID in NIT does not
match the original
network ID in SDT.
98000