Cisco D9854 Installation And Configuration Manual Download Page 43

Page: 43 / 440

Assigning a Program Channel to a PE (Program Entry)

Assigning a Program Channel to a PE (Program

Entry)

At the start-up screen, PE1 is initially displayed.

Press

ADV

and use the keys to scroll through the available program entries.

Press

ADV

again to select the channel number.

Use the keys to scroll through the available program channels or directly

enter the channel number using the 0 to 9 keys; press

SELECT

to save the

channel selection.

Important:

In addition to ASI out availability on all models, your unit will be

configured for either HD-SDI or MOIP output. Please follow the procedure for your
model to configure the outputs.

Summary of Contents for D9854

























































































































































































































































































































































































































































Search results

Summary of Contents for D9854

Reviews:

Cisco D9854, Installation And Configuration Manual, Page: 43 / 440

Search results

Summary of Contents for D9854

Reviews: