Cisco D9854, Installation And Configuration Manual, Page: 84 / 440

Chapter 4 Front Panel Operation
60
Menu Item Description Parameters
Status Indicates the current signal lock status
for the input. Locked - Indicates the receiver is
locked to a carrier with no valid
content.
Lock+Sig - Indicates the receiver is
locked to a carrier with valid
content.
No Lock - Indicates the receiver is
not locked to a carrier.
Rate (Mbps) Indicates the bit rate of the received
input signal. in Mbps
Level (dBm) Indicates the signal level of the received
signal. in dBm
SymRate Indicates the Symbol Rate of the
received signal. in Msymbols/second
FEC Indicates the FEC (Forward Error
Correction) rate of the received signal. N/A, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
7/8, 8/9 or 9/10
Modulation Indicates the modulation type for the
received signal. N/A, QPSK, 8PSK, DVB-S, DVB-
S2 or 16QAM
Pol Indicates the signal polarization setting.
This setting is only applicable when
LNB Power is set to H-NIT or V-NIT.
The selected setting must match the
polarization of the transmitted signal.
Horiz (Horizontal), Vert (Vertical)
or Auto
IQ Tuner Indicates the IQ (Input Signal Inversion)
for the received signal. Inv or NonInv
IQ Status Indicates the input signal spectrum
inversion setting (IQ), which allows the
operator to track and select inverted
and non-inverted digital signals.
Auto, Opposite, or Normal
Dnlk Freq (GHz) Indicates the current downlink
frequency. in GHz
L-Band Indicates the current L-Band frequency. in MHz
Pilot Present Indicates whether a Pilot is present for
the received signal. The Pilot is set on
the modulator for input signal
synchronization purposes.
Yes, No, or N/A
C/N (dB) Indicates the current Carrier-to-Noise
ratio. in dB