Cisco D9854, Installation And Configuration Manual, Page: 367 / 440

343
Alarm Message
Type Message Cause/Remedy Description Severity ID
FEC FPGA
Status
(D9854-I only)
Set FEC FPGA failed
to start Cause: Hardware
issue.
Remedy: Ensure
that the USB Flash
is installed,
formatted, and the
image is loaded.
Also, ensure that
the FEC FPGA is
installed and the
CPLD is properly
programmed.
FEC FPGA is
loaded, but
failed to start
(not ready).
Major 92400
FEC FPGA
Status
(D9854-I only)
Set FEC FPGA access
failed Cause: Hardware
issue.
Remedy: Ensure
that the USB Flash
is installed,
formatted, and the
image is loaded.
Also, ensure that
the FEC FPGA is
installed and the
CPLD is properly
programmed.
FEC FPGA is
loaded and
started,but
attempt to read
configuration
registers failed.
Major 92400
FEC FPGA
Status
(D9854-I only)
Set FEC FPGA
initialization failed Cause: Hardware
issue.
Remedy: Ensure
that the USB Flash
is installed,
formatted, and the
image is loaded.
Also, ensure that
the FEC FPGA is
installed and the
CPLD is properly
programmed.
FEC FPGA is
loaded and
started, but
initial
parameter
setup failed.
Major 92400
FEC FPGA
Status
(D9854-I only)
Clear FEC FPGA is
running OK – FEC FPGA is
loaded, started,
initialized, and
is fully
operational.
Major 92400