Cisco D9854, Installation And Configuration Manual, Page: 142 / 440

Chapter 4 Front Panel Operation
118
Menu Item Description Parameters
Config Type Indicates the current DPM
configuration change by a user
after changing the Output
Mode .
Edited by User - DPM changes were made.
Unmodified - No changes were made after
setting a new Output Mode.
Auto Re-Mapped - Output map changed
automatically to fix the output channel or
PID conflicts at the time of setup.
Changed by Uplink - DPM output changes
were initiated by an encoder.
Descramble Mode Select whether the output will
be descrambled if the input is
scrambled.
Scrambled - The output channel will remain
scrambled even if the PE is authorized and
can descramble the channel.
Descrambled - Descrambles the output
channel, and passes in-the-clear channels.
The default is Descrambled.
Insert Null Packet Select whether to insert null
packets into the output to
maintain output at a constant
bit rate.
Yes or No
Auto Map Sets whether the DPM resolves
the channel and PID collisions
automatically on the transport
outputs. New values are
assigned to the parameters that
caused the conflict. The new
assigned values are not used by
any incoming transport or other
PE outputs. If a collision is
detected, you can review the
new changes before applying
the new changes.
Yes or No
MOIP
Menu Item Description Parameters
Name This is the name assigned to the
transport output for ease of
reference.
20-character string