Cisco D9854 Installation And Configuration Manual Download Page 317

Page: 317 / 440

Configuring System Settings

293

In the

Administrator Password

field, enter your Administrator password used

to log on to the D9854 web GUI.

From the

Account Type

drop-down list, choose User, Admin, or Guest. The

following table illustrates the different login types:

Account Type

Access

Guest

View settings only.

User

View and edit settings.

Admin

View, edit settings, and add/delete user accounts.

Click

To Delete a User Account

Note:

This feature is available to a user with Admin privileges only.

In the Login Accounts table, select the user you want to remove.

Note:

if you do not have Admin privileges, NOT ALLOWED is displayed in the

Click

Delete Account Login

. The Delete Login Account window is displayed.

Enter your

Administrator Password

to confirm the deletion.

Click

. The selected user account is deleted.

Summary of Contents for D9854

























































































































































































































































































































































































































































Search results

Summary of Contents for D9854

Reviews:

Cisco D9854, Installation And Configuration Manual, Page: 317 / 440

Search results

Summary of Contents for D9854

Reviews: