Cisco D9854, Installation And Configuration Manual, Page: 386 / 440

Chapter 6 Service and Maintenance
362
Warning Message
Type Message Cause/Remedy Description ID
MPoIP Bitrate
Port #<n> Clear No active
stream[s],
monitoring
stopped
– – 92000
92100
MoIPI Port<n>:
FEC1 Loss
(D9854-I only)
Set FEC COL:
configured
stream not
present
Cause: The FEC Column
stream is configured, but
not present at the input.
Remedy: Verify the Flow
Configuration to ensure
that the ETH Port and
Destination IP and UDP
addresses are correct.
Contact the source
provider to confirm that
the transmission is on
and the configured FEC
streams are present.
UDP Stream Loss
condition is detected
for FEC Columns
stream on port
Data<n>.
93100
93102
MoIPI Port<n>:
FEC1 Loss
(D9854-I only) Clear FEC COL: stream
not configured – – 93100
93102
MoIPI Port<n>:
FEC1 Loss
(D9854-I only)
Clear FEC COL:
configured
stream present
– – 93100
93102
MoIPI Port<n>:
FEC2 Loss
(D9854-I only)
Set FEC ROW:
configured
stream not
present
Cause: The FEC Row
stream is configured, but
not present at the input.
Remedy: Verify the Flow
Configuration to ensure
that the ETH Port and
Destination IP and UDP
addresses are correct.
Contact the source
provider to confirm that
the transmission is on
and the configured FEC
streams are present.
The UDP Stream Loss
condition is detected
for FEC Rows stream
on port Data<n>.
93101
93103
MoIPI Port<n>:
FEC2 Loss
(D9854-I only)
Clear FEC ROW:
stream not
configured
– – 93101
93103
MoIPI Port<n>:
FEC2 Loss
(D9854-I only)
Clear FEC ROW:
configured
stream present
– – 93101
93103