Cisco D9854, Installation And Configuration Manual, Page: 373 / 440

349
Warning Message
Type Message Cause/Remedy Description ID
Transport Error Set Transport Rate
Error: FPGA
Overflow
Cause: Uplink settings
may have changed since
setting up the unit.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and/or
drop programs not
needed for downstream
devices. Contact your
(uplink) service provider
to verify the expected bit
rate settings.
The output rate is
higher than level set
by the user.
42000
Transport Error Clear Continuity Count
Error Cleared – Trap expires after 30
seconds. 42000
Transport Error Clear Buffer Overflow
Cleared – Trap expires after 30
seconds. 42000
Transport Error Clear Transport Error
Indicator Cleared – Trap expires after 30
seconds. 42000
Transport Error Clear Transport Rate
Error: FPGA
Overflow
Cleared
– Trap expires after 30
seconds. 42000
CI Status Set Different CA
Systems in
Top/Bottom
Slots
Cause: Different CA
systems are used in the
slots.
Remedy: Replace the CA
cards to use the same
CA system.
Different CA Systems
in Top/Bottom slots. 42500
CI Status Clear OK – – 42500
Video Format
Mismatch Set Video format
mismatch – Video Format
Mismatch. 43000
Video Format
Mismatch Clear Video format
match – – 43000