Cisco D9854, Installation And Configuration Manual, Page: 390 / 440

Chapter 6 Service and Maintenance
366
Warning Message
Type Message Cause/Remedy Description ID
D/R Invalid L-
Band Set Invalid calculated
L-band frequency
for Backup (list of
affected D/R
Backup
Transports)
Cause: Calculation of the
L-Band frequency
cannot be completed
based on the existing RF
input and Backup
Transport tuning
parameters.
Remedy: Contact your
PNC uplink
administrator to check
the tuning parameters
and RF Input LO
frequencies for the
identified disaster
recovery backup
transports.
The disaster recovery
backup transport
failed tuning
validation due to L-
Band calculation.
99350
D/R Invalid L-
Band Clear cleared – The error is cleared
before re-validating
the tuning.
99350
D/R Value Out
of Range Set Tuning
parameter out of
range for Backup
(list of affected
DR Backup
Transports)
Cause: One or more
tuning parameter values
in one or more of the
Backup Transport is
outside of the expected
range.
Remedy: Contact your
PNC uplink
administrator to check
the tuning parameters
and RF Input settings for
identified disaster
recovery backup
transports.
The Disaster Recovery
Table received from
the uplink is invalid.
99360
D/R Value Out
of Range Clear cleared – The error is cleared
before re-validating
tuning.
99360