Cisco D9854 Installation And Configuration Manual Download Page 260

Page: 260 / 440

Chapter 5 Web GUI Setup and Monitoring

236

Click

Apply

Click

Copy To MOIP

to copy all the DPM data from the ASI output to the MPEG

over IP output.

Viewing the ASI Output Transport Status

From the user interface of the D9854/D9854-I, choose

Transport Stream

Output

Transport Status

under

ASI Output

. The PID Output Status page is displayed.

The

Program Entry - Referenced PIDs

table displays the specified PE ES PIDs

information on the output.

The

Output Channel and PID Conflicts

table displays a list of conflicts when the

DPM alarm is active.

Summary of Contents for D9854

























































































































































































































































































































































































































































Search results

Summary of Contents for D9854

Reviews:

Cisco D9854, Installation And Configuration Manual, Page: 260 / 440

Search results

Summary of Contents for D9854

Reviews: