Buffalo Tech TeraStation 5000, User Manual

Page: 178 / 181

178
Default Settings
Administrator’s Name admin
Password password
Shared Folders
“share” (for both Windows and Mac computers). The recycle bin is enabled on
“share” by default.
DHCP Client
Normally, the TeraStation will get its IP address automatically from a DHCP
server on the network.
If no DHCP server is available, then an IP address will be assigned as follows:
IP Address: 169.254.xxx.xxx (xxx is assigned randomly when booting the
TeraStation.)
Subnet Mask: 255.255.0.0
Registered Groups
“hdusers”, “admin”, and “guest”
You cannot edit or delete these default groups.
Microsoft Network Group Name WORKGROUP
Ethernet Frame Size 1518 bytes (Including 14 bytes of the header and 4 bytes of FCS)
AFP Enabled
FTP Disabled
NTP Enabled
Print Server Enabled
WebAccess Disabled
Time Machine Disabled
TeraSearch Disabled
RAID Mode
TS5800D, TS5600D, TS5400D, TS5400R: RAID 5
TS5200D: RAID 1
Specifications
Check www.buffalotech.com for information about the latest products and specifications.
LAN Port
Interface
IEEE 802.3ab (1000BASE-T)
IEEE 802.3u (100BASE-TX)
IEEE 802.3 (10BASE-T)
Transfer Speed
1000 Mbps Full duplex (auto-negotiation)
100 Mbps Full duplex/Half duplex (auto-negotiation)
10 Mbps Full duplex/Half duplex (auto-negotiation)
Number of Ports 2 ports (supports Auto-MDIX)
Connector Type RJ-45 8-pin
Protocol TCP/IP
Access Method CSMA/CD
File Sharing SMB/CIFS, AFP, FTP, SFTP, NFS
Management HTTP/HTTPS
Jumbo Frames
1518/4102/7422/9216 bytes
(Including 14 bytes of the header and 4 bytes of FCS)