161
By default, the TeraStation adjusts its clock automatically by using a default NTP server. This NTP server belongs to
Internet Multi Feed Inc. For more information, visit www.jst.mfeed.ad.jp.
To use a different NTP server, select
Name/Time/Language
from
Management
. Click
Time
, then
Edit
. Uncheck “Use
Default NTP Server” and enter a new NTP IP address. Click
OK
.
If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the
TeraStation.
Note:
The internal clocks of the TeraStation and other devices on your network may run at slightly different speeds.
Over a long period of time your network devices may show somewhat different times, which can cause network
problems. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior. For best
results, keep all clocks on the network set to the same time by adjusting them regularly, or use an NTP server to
correct them all automatically.
6
Click the
Language
tab. Select the language to be used and click
OK
.
Note:
This tab changes the language used by the TeraStation for email notifications, DLNA, and other functions. To
change the language displayed in Settings, go to Advanced Settings or Easy Admin and click
Language
in the menu
bar. Choose your desired language from the drop-down menu.
Beep Alerts
You can set the TeraStation to beep when certain errors occur.
Summary of Contents for TeraStation 5000
Page 1: ...TeraStation 5000 User Manual www buffalotech com 35020018 04 2014 01...
Page 10: ...10 Chapter 1 Installation Diagrams TS5800D TS5600D TS5400D...
Page 69: ...69 4 Insert the new drive in the empty slot Slide the drive in with the locking mechanism open...
Page 70: ...70 5 Swing the lock back down until it clicks into place...
