Buffalo Tech TeraStation 5000, User Manual

Page: 40 / 181

40
Using JBOD
With JBOD, each hard drive in the TeraStation is addressed separately. To put drives from an array into JBOD, follow the
steps below.
1
Select RAID .
2
Select the array to delete.
3
Click Delete RAID Array .
Once JBOD is configured, create shared folders on each drive to use them.
Changing RAID Mode
To change the RAID mode, first put the drives in JBOD.
1
Select RAID .
2
Click the array to delete.
Note: If the “RAID Mode” field is blank, the array is already in JBOD. Proceed to step 7.
3
Click Delete RAID Array .
4
The “Confirm Operation” screen will open. Enter the displayed number, then click OK .