47
4
When the following message is displayed, it is safe to unplug the drive.
Note:
To remount the drive, unplug it and then plug it back in.
Checking Drives
A disk check tests the data on a drive in the TeraStation or connected via USB for integrity. Errors are fixed automatically.
With large drives, a disk check may run for many hours. Shared folders cannot be accessed during a disk check. Do not
turn off the TeraStation until the disk check is finished. Use the procedure below to run a disk check.
1
In Settings, click
Drives
.
2
Select
Drives
to check an internal drive or
USB Drives
to check an external drive.
3
Select the drive to test, then click
Check Disk
.
Summary of Contents for TeraStation 5000
Page 1: ...TeraStation 5000 User Manual www buffalotech com 35020018 04 2014 01...
Page 10: ...10 Chapter 1 Installation Diagrams TS5800D TS5600D TS5400D...
Page 69: ...69 4 Insert the new drive in the empty slot Slide the drive in with the locking mechanism open...
Page 70: ...70 5 Swing the lock back down until it clicks into place...
