67
• After a drive is replaced, it takes about 30 minutes before normal file reading and writing are restored. Settings
may not be accessible during this period.
• Do not change the order of the hard drives in the TeraStation. For example, pulling out drive 1 and replacing it
with drive 2 may cause data to be corrupted or lost.
• If the LCD display does not change after a new drive is installed, click
Rediscover Disk
in Settings.
• If the message “HDx Error E22 HDx Can’t Mount” remains on the LCD display after the RAID rebuild is finished,
reboot your TeraStation.
Hard Drive Replacement Examples
Drive Replacement (using JBOD or a redundant RAID mode such as RAID 1, 5, or 6 with
auto-shutdown disabled)
This section describes replacing a drive with
the TeraStation on
.
1
TS5800D,TS5600D,TS5400D,TS5200D: Open the front cover with the included key.
2
The failed drive’s status LED will be glowing red. Push its unlock button and swing the lock mechanism out.
Summary of Contents for TeraStation 5000
Page 1: ...TeraStation 5000 User Manual www buffalotech com 35020018 04 2014 01...
Page 10: ...10 Chapter 1 Installation Diagrams TS5800D TS5600D TS5400D...
Page 69: ...69 4 Insert the new drive in the empty slot Slide the drive in with the locking mechanism open...
Page 70: ...70 5 Swing the lock back down until it clicks into place...
