Buffalo Tech TeraStation 5000, User Manual

Page: 61 / 181

61
Mutual Authentication Password Setup for Your Computer
Each computer tat connects to an iSCSI volume will need to enter the mutual authentication password for the volume.
A computer cannot connect to multiple volumes with different mutual authentication passwords at the same time.
To change the mutual authentication password at the computer to the mutual authentication password for another
volume, navigate to
Setup - Set Mutual CHAP Secret in the iSCSI Connection Tool menu.
Note: If different passwords are set for the mutual authentication password of the TeraStation (entire system) and
mutual authentication passwords for each volume, after the volume is connected, the volume name will no longer
be displayed in the “Volume” field of the iSCSI Connection Tool. If this happens, navigate to
Setup - Set Mutual CHAP
Secret in the iSCSI Connection Tool, enter the TeraStation’s password, and click OK .
Disconnecting and Unregistering the TeraStation
To disconnect the TeraStation, disconnect the volume and remove the registration as shown below.
1
Click Start - All Programs - BUFFALO - iSCSI Connection Tool - iSCSI Connection Tool .
For Windows 8.1 and Windows 8, click the iSCSI Connection Tool .
2
Select the volume to disconnect from “Volume”, then click Disconnect .
3
Click Yes .
4
Select the TeraStation to be disconnected from “Target”, then click Unregister iSCSI Device .
Note: When connecting to the TeraStation from multiple computers, follow the above procedure to remove the
registration from each computer.
5
Disconnect the Ethernet cable of the TeraStation.
The TeraStation is now disconnected.