159
The file operation log stores file operations performed on the internal hard drives. File operations on USB drives are
not logged.
To transfer logs
1
Click
Edit
.
2
Enable “Syslog Transfer”.
3
Enter the IP address of the syslog server where you want to transfer the logs to.
4
Select the type of log that you want to transfer from “Logs To Transfer”.
5
Click
OK
.
FTP logs cannot be written to a syslog server.
Logs are in UTF-8 format. Your syslog server must support UTF-8 encoding.
To create a link to the logs in the shared folder
1
Click
Edit
.
2
Enable “Share Link to Logs”.
3
Select the shared folder where the link will be created in “Target Shared Folder”.
4
Click
OK
.
Under the selected shared folder, a folder named “system_log” will now contain the logs.
Updating the Firmware
If a new firmware is available, a message is displayed when the TeraStation boots. You can update the firmware by the
following ways:
Summary of Contents for TeraStation 5000
Page 1: ...TeraStation 5000 User Manual www buffalotech com 35020018 04 2014 01...
Page 10: ...10 Chapter 1 Installation Diagrams TS5800D TS5600D TS5400D...
Page 69: ...69 4 Insert the new drive in the empty slot Slide the drive in with the locking mechanism open...
Page 70: ...70 5 Swing the lock back down until it clicks into place...
