Buffalo Tech TeraStation 5000, User Manual

Page: 43 / 181

43
4
Select a RAID mode to “RAID 1”.
5
Check “Add a disk to RAID array with RMM. Your data will be preserved.”.
6
Select the drive on which you do not want to erase data.
7
Select the drive to add to the RAID array.
8
Click Create RAID Array . The “Confirm Operation” screen will open.
9
Enter the confirmation number, then click OK .
Adding a drive to an Existing RAID Array
You can add a drive to a RAID 1, RAID 5, or RAID 6 array. Drives that can be added to the RAID array show “Normal (RMM
available)” or “JBOD.”
Notes:
• Each drive must have the same capacity.
• RMM can be used to expand an array by one drive per operation. To expand by two or more drives, RMM must be
performed multiple times.
1
Click Drives .