Avaya programming and use, Installation And Use Manual, Page: 75 / 468

Overview
3-1
3
Initial System Programming
3
Overview
3
After you install the system hardware, you must program basic system settings, assign lines, and
customize extensions. To do this, you must understand the basics of programming.
Programming a PARTNER System
3
You can program a PARTNER system in either of the following ways:
■
from a PC running PARTNER ACS R6.0 PC Administration software (PC Administration)
■
from a system display telephone at extension 10 or extension 11 (Set Administration)
PC Administration
3
The PARTNER ACS R6.0 PC Administration software enables you to program and administer all
features for a PARTNER system from a local (that is, on-site) or remote PC. Using this application,
you can:
■
program features to the PARTNER system
■
set the date and time on the PARTNER system
■
copy buttons from one set to another
■
back up the programming (translations) from the PARTNER system to the PC card in the
PARTNER system
■
retrieve a copy of the translation from the PC card in the PARTNER system to your PC
■
print the system programming information to a text file
■
retrieve and view diagnostic information from the PARTNER system
■
administer the DSL module
■
administer the T1 module