Avaya programming and use, Installation And Use Manual, Page: 120 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Dialing Restrictions and Permissions
4-22
■
The entries you must make to permit or restrict toll calls differ depending on the setting for Toll
Call Prefix (#402).
■
If Star Code Dial Delay (#410) is active, after a valid star code is dialed, the system resets the
dialing restrictions to check the number beginning with the first digit after the star code.
■
If you want to go to another programming procedure when entering telephone numbers in a
list, you must press
N
+
P
, since entering
#
and a three-digit code is
considered part of the telephone number.
Programming
4
To create a list of Disallowed Phone Numbers:
1. Press
f00ss#404
at extension 10 or 11.
2. At the
List Number :
prompt, enter a list number (1–8).
3. At the
Entry
: prompt, select a list entry (01–10).
4. At the
Data- - - - - - - - - - - -
prompt, enter the first telephone number.
5. To save the telephone number in memory, press
e
.
6. Do one of the following:
■
To add other telephone numbers to this list, press
n
to select a different list entry
and repeat Steps 4 and 5.
■
To change the telephone number you just entered, press
r
and repeat Steps 4
and 5.
■
To delete the telephone number you just entered, press
r
.
■
To create another list, press
N
+
P
and repeat from Step 2.
7. Select another procedure, or exit programming mode.