Avaya programming and use, Installation And Use Manual, Page: 128 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Distinctive Ring (#308)
4-30
Distinctive Ring (#308)
4
Use this feature to determine whether calls should ring at a tip/ring device using the system’s
distinctive ringing patterns—different patterns for outside, intercom, and transferred calls—or
whether all calls to the tip/ring device should ring like outside calls.
Considerations
4
■
Change the setting to Not Active if a tip/ring device such as a modem or answering machine
does not pick up intercom or transferred calls.
■
If distinctive ring is set to Not Active for an extension with both a system telephone and a tip/
ring device, the system telephone continues to use the system’s distinctive ringing patterns,
but all calls ring at the tip/ring device using a single ring burst.
■
The system does not pass distinctive ringing patterns generated by a PBX or central office
through to extensions (regardless of the setting for this feature).
Programming
4
To change the Distinctive Ring setting:
1. Press
f00ss#308
at extension 10 or 11.
2. At the
Extension:
prompt, enter the number of the extension to be programmed.
3. Press
D
until the appropriate value appears.
■
1 = Active (outside, intercom, and transferred calls ring differently, using the system’s
distinctive ringing patterns; the factory setting)
■
2 = Not Active (outside, intercom, and transferred calls all ring using a single ring burst)
4. To program another extension, press
n
or
p
until the extension number appears
on the display. Repeat Step 3.
5. Select another procedure, or exit programming mode.