Avaya programming and use Installation And Use Manual Download Page 229

Page: 229 / 468

Operator Features

Night Service Button (#503)

7-17

Press the Night Service Button at extension 10.

■

If a System Password is programmed, the green light next to the button flashes; you
must continue with Step 2.

■

If no System Password is programmed, the green light is on steady and Night Service is
on.

Enter the password.

The green light is on steady. Night Service is on.

Summary of Contents for programming and use





















































































































































































































































































































































































































































































Search results

Summary of Contents for programming and use

Reviews:

Avaya programming and use, Installation And Use Manual, Page: 229 / 468

Search results

Summary of Contents for programming and use

Reviews: