manualshive.com logo in svg

Avaya programming and use, Installation And Use Manual, Page: 38 / 468

Share
Download
Avaya programming and use Installation And Use Manual Download Page 38

PARTNER

®

 Advanced Communications System Installation, Programming, and Use

Installing the Control Unit

2-6

5.

Remove the clear plastic protectors from the 
connectors on the right side of the wall-
mounted PARTNER ACS processor module 
and the module to be added by grasping the 
tabs on the ends of the protector and lifting 
(see 

Figure 2-3

).

Figure 2-3. Removing the Plastic 

Protector

6.

Slide the second module onto the PARTNER 
ACS processor module, making sure the 
mounting tracks interlock (see 

Figure 2-4

).

Figure 2-4. Module Mounting Tracks

7.

Attach the 2-slot carrier to the top right side of 
the two modules (see 

Figure 2-5

), properly 

engaging the connectors on the modules to the 
carrier.

Figure 2-5. Attaching the 2-Slot 

Carrier

Tab

Tab

Mounting

Tracks

PARTNER

MODULE

206

Summary of Contents for programming and use





















































































































































































































































































































































































































































































Reviews:

No comments