manualshive.com logo in svg

Avaya programming and use, Installation And Use Manual, Page: 125 / 468

Share
Download
Avaya programming and use Installation And Use Manual Download Page 125

Programming System Options

Direct Inward Dialing (DID)— Release 6.0 and Later

4-27

Direct Inward Dialing (DID)

—

Release 6.0 and Later

4

Use this feature to have Direct Inward Dialing (DID) numbers on a T1 line routed automatically to 
the PARTNER extensions, hunt groups, or calling groups you specify. When a Direct Inward 
Dialing (DID) call arrives, the PARTNER system “collects” the digits from the T1 service provider 
(that is, the number that was dialed) and matches the number to a DID Mapping Table you 
created. If the incoming number matches an entry in the DID Mapping table, the call rings at the 
matching extension or hunt group.

To use this feature, you must:

■

purchase a “block” of Direct Inward Dialing (DID) telephone numbers from your T1 service 
provider

■

use PARTNER ACS R6.0 PC Administration to map extensions, hunt groups, or calling groups 
to the Direct Inward Dialing (DID) telephone numbers

See the PARTNER ACS R6.0 PC Administration online help for more information.

Considerations

4

■

A T1 module is required for Direct Inward Dialing (DID).

■

You must use the PARTNER ACS R6.0 PC Administration software to program Direct Inward 
Dialing (DID) on T1 lines.

■

You can have a call on a T1 line with Direct Inward Dialing (DID) ring at an extension that 
cannot access a T1 line from a line or pool button. If the line or pool button is not programmed 
at an extension, or the line or pool button is busy, the call rings at one of the extension’s 
Intercom buttons.

■

Outgoing calls can be made on T1 lines administered for Direct Inward Dialing (DID).

■

Automatic System Answer features are disabled on T1 lines with Direct Inward Dialing 
(DID).

■

Direct Extension Dialing features are disabled on T1 lines with Direct Inward Dialing (DID).

■

Caller ID information is unavailable on T1 lines. The message “Direct In Dial” or “DID” is 
displayed for incoming calls on T1 lines with Direct Inward Dialing (DID).

■

You should not assign T1 lines with Direct Inward Dialing (DID) to Hunt Groups. If a Hunt 
Group contains T1 lines with Direct Inward Dialing (DID), callers will receive busy signal 
when all extensions in the Hunt Group are busy (for example, off-hook), have Do Not Disturb 
activated, or are in programming mode. 

Outgoing calls can be made on T1 lines administered for Direct Inward Dialing (DID). 

Summary of Contents for programming and use





















































































































































































































































































































































































































































































Reviews:

No comments