Avaya programming and use, Installation And Use Manual, Page: 144 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Line Assignment (#301)
4-46
4. To program another extension, press
n
or
p
until the extension number appears
on the display. Then repeat Step 3.
5. Repeat Steps 3 and 4 for all extensions that you want to change.
6. Select another procedure, or exit programming mode.
Line Assignment (#301)
4
Use this feature to assign the outside lines that are available at an extension. The default order of
line assignment to the buttons on a system telephone is from left to right, starting in the bottom left
corner (see
Figure 4-1 below). To put the lines in a different order, first use this procedure to
remove all assigned lines; then assign lines in the desired order. This procedure applies to key
extensions or to individual lines on pooled extensions.
Figure 4-1. Default Line Assignments
Intercom Intercom
Ext.
Message