Avaya programming and use, Installation And Use Manual, Page: 449 / 468

Flow Charts
E-9
Centralized Telephone Programming Flow Chart—How to Use
1 1
To use the Centralized Telephone Programming Flow Chart, follow these instructions first:
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11.
■
To Enter Programming Mode:
— Press
f00
— Press
ssc
— Dial the extension number to be programmed. Buttons on to which lines or pools are assigned
light up to show the current Line Ringing setting: remaining buttons can be programmed with
Auto Dial number or features.
■
To Program Another Feature at the Same Extension:
— After you program one feature, continue with the instructions in the box for the next feature.
■
To Change Setting For Another Extension
— Press
c
— Dial the new extension’s number
■
To Erase A Feature or Auto Dial Button:
— Press the programmed button
— Press
!
■
To End Programming Mode:
— Press
f00
2.0
3.0
= Factory setting
= Button with lights required
= Button with lights recommended
= PARTNER ACS Revision 2.0 or later
= PARTNER ACS Revision 3.0 or later
Icon Description
6.0
= PARTNER ACS Revision 6.0 or later