Avaya programming and use, Installation And Use Manual, Page: 71 / 468

Installation
Installing Telephones
2-39
Connecting a PARTNER-CA48 Intercom Autodialer
2
You can connect a PARTNER-CA48 Intercom Autodialer to a PARTNER telephone at an
operator’s extension. The Intercom Autodialer is shipped with an adapter, a D8W line cord, a
power cord, a power unit, and a button-labeling sheet.
Follow these steps to connect an Intercom Autodialer to a PARTNER telephone:
1. Plug the adapter into the wall jack
(see
Figure 2-36 ).
2. Plug one end of the D8W line cord into
the J1 jack on the adapter.
3. Plug the other end of the D8W line cord
into the IN jack on the bottom of the
Autodialer.
4. Plug the blue-tinted connector (labeled
D8AC) of the power cord into the jack
on the power unit.
CAUTION:
Use only the power unit supplied
with the PARTNER-CA48
Intercom Autodialer.
5. Plug the other end (clear tinted) of the
power cord into the J2 jack on the
adapter.
6. Plug the power unit into an electrical
outlet.
7. Plug the telephone’s modular
telephone cord (LINE jack) into the
OUT jack on the bottom of the
Autodialer.
Figure 2-36. Connection of Cords for the
Intercom Autodialer
You can wall-mount the Intercom Autodialer to work next to a wall-mounted system
telephone. See the instructions provided with the Autodialer.
Feature
Intercom
ABC
2
DEF
3 1
+
–
Conf
JKL
5
MNO
6
TUV
8
WXYZ
9 Transfr
Mic
HFAI
Hold 0
GHI
4
PQRS
7
* # Spkr
Intercom
Message
Ext.
Adapter
D8W Cord
D8AC Cord
Modular
Telephone
Cord