manualshive.com logo in svg

Avaya programming and use, Installation And Use Manual, Page: 327 / 468

Share
Download
Avaya programming and use Installation And Use Manual Download Page 327

Using Auxiliary Equipment

Contact Closure Adjunct

9-11

Connecting the Contact Closure Adjunct

9

Follow these steps to connect the Contact Closure Adjunct (see 

Figure 9-6

):

1.

Insert the modular plug into the Contact Closure jack, the first jack on the PARTNER ACS 
processor module.

2.

Route the cord through the processor module’s wire manager.

3.

Connect the other end of the cord to the jack in the Contact Closure Adjunct.

4.

Have a qualified electrician wire the Contact Closure device or devices (such as an electronic 
lock or alert) to the wiring receptacles in the other end of the Contact Closure Adjunct. See the 
information shipped with the Contact Closure Adjunct for wiring instructions.

Figure 9-6. Connecting the Contact Closure Adjunct

PART

NER 3000

Contact Closure Adjunct

Contact 
Closure Jack

Contact
Closure
Adjunct

Summary of Contents for programming and use





















































































































































































































































































































































































































































































Reviews:

No comments