Avaya programming and use, Installation And Use Manual, Page: 42 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Installing the Control Unit
2-10
Figure 2-11. Labeling Jacks
Follow these steps to label the line and extension jacks:
1. Label the line jacks on the processor module, beginning with “1” at the top line jack.
2. Do one of the following:
a. For a 2-slot carrier, label the line jacks on the other module.
b. For a 5-slot carrier, label the line jacks on the other modules by starting with the leftmost
module and ending with the rightmost module.
3. Label the extension jacks on the processor module, beginning with “10” at the topmost
extension jack.
4. Do one of the following:
a. For a 2-slot carrier, label the extension jacks on the other module.
b. For a 5-slot carrier, label the extension jacks on the other modules by starting with the
leftmost module and ending with the rightmost module.
■
The T1 module is assigned 16 lines, even though it has only one line jack. If
you have a T1 module in a 5-slot carrier, label the line jacks on the module
after the T1 module to begin with “20.”
■
The 1600 DSL module is assigned 16 lines, even though it has only one line
jack. If you have a 1600 DSL module in a 5-slot carrier, label the line jacks on
the module after the 1600 DSL module to begin with “20.”
1
2
3
10
11
12
13
14
15
16
17
1
2
3
10
11
12
13
14
15
16
17
1
2
3
10
11
12
13
14
15
16
17
2-Slot Carrier
ACS
Processor
Module
308EC
Module
5-Slot Carrier
ACS
Processor
Module
2 308EC
Modules
308EC
Module
1600DSL
Module
Stand-Alone
ACS
Processor
Module
23
24
25
34
35
36
37
38
39
40
41
26
27
28
20
21
22
26
27
28
29
30
31
32
33
4
5
6
18
19
20
21
22
23
24
25
Extension
Jacks
Line
Jacks
Line
Jacks
Extension
Jacks
Line
Jacks
Extension
Jacks
18
19
20
21
22
23
24
25