Avaya programming and use, Installation And Use Manual, Page: 328 / 468

PARTNER
®
Advanced Communications System Installation, Programming, and Use
Contact Closure Adjunct
9-12
Contact Closure Group (#612)
9
Use this feature to specify which system extensions can activate each Contact Closure. Before a
user can activate a contact closure, you must assign the user’s extension to the Contact Closure
Group (#612) for that Contact Closure.
Considerations
9
■
If a Contact Closure is used to control a door lock and a doorphone is installed at that door,
you may want to assign the extensions in the Contact Closure Group to also be the
Doorphone Alert Extensions (#606) for that doorphone.
■
When an extension is included in the appropriate Contact Closure Group, the user at that
extension can use Contact Closure to activate the contact closure device.
Programming
9
To assign extensions to a Contact Closure Group:
1. Press
f00ss#612
at extension 10 or 11.
2. At the
Contact Number
: prompt, enter the number for the Contact Closure (1 or 2).
3. At the
Extension
: prompt, enter the two-digit extension number that you want to assign to
this Contact Closure Group.
4. To assign or unassign the extension, press
D
until the appropriate value appears:
■
1 = Assigned to the Contact Closure Group
■
2 = Not Assigned to the Contact Closure Group (the factory setting)
5. Do one of the following:
■
To assign or unassign another extension to the same Contact Closure Group, press
n
or
p
until the correct extension appears. Then repeat Step 4.
■
To assign extensions to the other Contact Closure Group, press
N
, press
P
, enter the number for the other Contact Closure (1 or 2), and then begin at
Step 3.
6. Select another procedure, or exit programming mode.