manualshive.com logo in svg

Avaya programming and use, Installation And Use Manual, Page: 104 / 468

Share
Download
Avaya programming and use Installation And Use Manual Download Page 104

PARTNER

®

 Advanced Communications System Installation, Programming, and Use

Backup and Restore

4-6

Backup Programming—Manual (#124)

4

Use this feature to manually back up all the programming (except the system date, day, and time) 
to a Backup/Restore PC Card. 

Programming

4

To begin a manual backup of system settings:

1.

Verify that only one Backup/Restore Card is in the processor module.

2.

Press 

f00ss#124

 at extension 10 or 11.

If there is a problem, one of the following messages appears (see 

Chapter 11, 

“Troubleshooting”

 for explanations and corrective actions): 

■

Card is Write Protected

 

■

Insert Valid Card

 

■

SystemBusy

 

If there is no problem, the display instructs you to press Enter to begin the backup.

3.

Press 

e

.

A status message is displayed indicating that a backup is in progress, and within 30 seconds, 
a message appears indicating the result. 

If the backup was successful, the new backup information replaces the information in the old 
MAN.mmddyy file on the Backup/Restore PC Card, and the mmddyy extension now reflects 
the current date. Backup information created during a manual backup does not overwrite any 
AUTO.mmddyy file.

If the backup failed, you see one of the following error messages (see 

Chapter 11, 

“Troubleshooting”

 for explanations and corrective actions):

■

Backup Failed:Check Card

 

■

Backup Failed:SystemBusy

 

4.

Exit programming mode.

If you exit the procedure before the backup finishes, you do not interrupt the backup, 
but you do not see feedback messages on the display. 

Summary of Contents for programming and use





















































































































































































































































































































































































































































































Reviews:

No comments